- Simple to maintain with consumable spares being easy to fit
- Seal instantly without warm up delay
Superseal Impulse machines are fitted with 'plug-in' replacement elements for easy maintenance. Units feature either single timer heat control to adjust for a material thickness up to 250 µm (1000 gauge) polyethylene, or a dual timer for complete control of the weld and cooling cycle. Units with a cutter option are able to seal and trim oversize bags or to produce bags of different lengths from 'layflat' polyethylene tubing.
Hand operated machines - HM 2500 and HM 3000: These standard models have a single electronic timer for control of the heating cycle only. The HM 3000 is able to handle thicker film (250 µm) than the HM 2500 (150 µm).
Hand operated machines - HM 2950, stainless steel: This model has been specifically designed for food, medical and laboratory applications where hygiene and health and safety criteria require an easily cleaned, moisture resistant and non-corrosive sealer. This machine has a dual timer with a pre-set cooling time. Constructed from food grade 316 stainless steel, with a low voltage safety operation and IP rated components. The machine is supplied with a spare heater bar assembly to allow continuous production.
Hand operated machines - HM 3000 CD: This model has a dual electronic timer for complete control of the heating and cooling cycle and a cutter to facilitate bag production from layflat tubing.
Hand operated machines - HM 3000 CDM: This model has a dual electronic timer for complete control of the heating and cooling cycle and a cutter to facilitate bag production from layflat tubing. It also features a hold-down magnet, which allows hands-free completion of sealing cycles.
Foot operated machines - HM 1300 E: This medium capacity, general purpose model has a single electronic timer. It is foot operated via a chain and pedal, leaving hands free to manipulate large or heavy packages.
Foot operated machines - HM 3100 CDL, HM 6500 CDL and HM 7600 DL: Simply bench mounted, these models have a dual electronic timer for complete control of the heating and cooling cycle, and a cutter to facilitate bag production from layflat tubing. They also have a cable operated foot pedal, which allows increased flexibility of installation. The foot pedal has a lever action design, which helps to minimise operator effort.
