Sie suchten nach: EDWARDS HIGH VACUUM METTLER

Lieferant: EDWARDS HIGH VACUUM METTLER

Beschreibung: ULTRAgrade® 15 and 19 oils result from a new process. Most manufacturers use a solvent refining process, whereas these oils are produced by a unique hydrotreating process. This process eliminates nitrogen, sulphur and oxygen and the aromatic hydrocarbons, leaving a clear base stock essentially free of impurities.

Lieferant: EDWARDS HIGH VACUUM METTLER

Beschreibung: The active gauge displays are a range of simple, low cost units for the measurement and control of vacuum from atmosphere to 10^-9 mbar.

Artikel-Nr: (EDWAA37132919)

Lieferant: EDWARDS HIGH VACUUM METTLER

Beschreibung: E2M1,5 two stage oil sealed rotary vane pumps are renowned for achieving high ultimate vacuum and rapid pumping speeds, with quiet operation and compact size.

VE: 1 * 1 ST

Sale!

Artikel-Nr: (EDWAH02100017)

Lieferant: EDWARDS HIGH VACUUM METTLER

Beschreibung: Schlauch, PVC, PVC, Gewebeeinlage, Schlauch Innen-Ø: 25,4 mm, Länge: 1 m

VE: 1 * 1 ST

Sale!

Artikel-Nr: (619-0222)

Lieferant: EDWARDS HIGH VACUUM METTLER

Beschreibung: Active Inverted Magnetron gauge is a combined unit of the gauge-head and controller. This gauge operates as a cold cathode ionisation gauge, in which pressure is measured indirectly as a function of the current that flows in a Townsend discharge maintained in the body tube.

VE: 1 * 1 ST

Sale!

Lieferant: EDWARDS HIGH VACUUM METTLER

Beschreibung: Modell APG. Diese Messgeräte haben einen atmosphärischen Luftdruckmessbereich bis 1×10⁻⁴ mbar und vereinen Messkopf und Steuerung in einer kompakten aktiven Einheit.

Lieferant: EDWARDS HIGH VACUUM METTLER

Beschreibung: Mist filters are used to separate and trap oil mist and dischage the odours with the exhaust from oil sealed rotary vacuum pumps.

Lieferant: EDWARDS HIGH VACUUM METTLER

Beschreibung: Pipeline, Edelstahl, Länge: 500 mm

Artikel-Nr: (EDWAD39700000)

Lieferant: EDWARDS HIGH VACUUM METTLER

Beschreibung: TIC Instrument controller is a compact control with a large, clear graphical display, an intuitive user interface and serial communications.

VE: 1 * 1 ST

Sale!

Lieferant: EDWARDS HIGH VACUUM METTLER

Beschreibung: Reducing pieces made of stainless steel.

Artikel-Nr: (EDWAC105-14-401)

Lieferant: EDWARDS HIGH VACUUM METTLER

Beschreibung: Clamping rings made of stainless steel, for connections with NW flanges.

VE: 1 * 1 ST

Sale!

Lieferant: EDWARDS HIGH VACUUM METTLER

Beschreibung: Elbows 90°, DN 40 mm, Edelstahl

Lieferant: EDWARDS HIGH VACUUM METTLER

Beschreibung: T-pieces made of aluminium or stainless steel.

Artikel-Nr: (EDWAH11150001)

Lieferant: EDWARDS HIGH VACUUM METTLER

Beschreibung: A range of Apiezon® greases is offered for use on high vacuum systems and for many general applications in the laboratory. These high purity greases are non-toxic, are easy to apply and clean off and have long shelf lives.

VE: 1 * 25 g

Sale!

Lieferant: EDWARDS HIGH VACUUM METTLER

Beschreibung: The XDS pumps are used as a patented bearing shield to isolate the vacuum environment from all forms of lubricant, not only making it totally dry, but hermetically sealed. The shield also protects the bearing from any process vapours. Adjustable gas ballast allows vapour to be handled and opens up the range of applications to many that were previously unsuited to scroll pumps. The XDS-C range are designed for pumping condensable vapors and use materials selected for a wide range of laboratory wet chemistry applications.

Lieferant: EDWARDS HIGH VACUUM METTLER

Beschreibung: ATEX RV pumps have an external ATEX classification of Ex II 2G IIC T4 or Ex II 2G IIB T4 and internal ATEX classification Ex II 3G c IIB T4. They are suitable for use in potentially explosive atmospheres such as hazardous area pumping. They are supplied with the gas ballast port which must be fitted with an inert gas purge while pumping flammable gasses or vapours to dilute such gases or vapours below the lower explosive limit.