Sie suchten nach: LABCONCO

Lieferant: LABCONCO

Beschreibung: These portable systems provide user protection by keeping powders and particulates contained during weighing procedures. The built-in blower and HEPA filter are mounted in the upper plenum to save space, and the enclosures have low installation costs and require no outside ducting. Systems also provide quiet operation as low as 45 dBA, depending on face velocity.

Lieferant: LABCONCO

Beschreibung: Glassware washing machines, Non-foaming powder detergent, LabSolutions™, large pail,12,5 kg, 400 loads

Zertifikate

Lieferant: LABCONCO

Beschreibung: These PuriCare Open Access Transfer Station offer utmost efficiency for cage changing operations. Open access on two sides provides ample workspace for one or two operators to transfer animals from dirty cages to clean ones. This enclosure provides personnel, animal and environmental protection. HEPA-filtered vertical airflow provides Class 100 clean air in the work area to protect the animals from cross-contamination. At the same time, room air is drawn into grilles located on the work surface directly below the sash openings to ensure containment and protect the operator from allergens. All contaminated air inside the enclosure is filtered so that particulate-free air is exhausted back into the room, protecting the environment.

Lieferant: LABCONCO

Beschreibung: These cabinets support fume hoods and safely store and vent solvents and other flammable liquids. The contents inside them are also protected during any fire case.

Lieferant: LABCONCO

Beschreibung: Guardian digitaler Airflow Luftstromwächter

Lieferant: LABCONCO

Beschreibung: Pump inlet filter

Artikel-Nr: (LBCP3924200)

Lieferant: LABCONCO

Beschreibung: Organic carbon filters for Protector® work stations with built-in blower, 5,4 kg, 457×914×250 mm, Außen B×T×H: mm mm

VE: 1 * 1 ST

Sale!

Artikel-Nr: (LBCP3980422)

Lieferant: LABCONCO

Beschreibung: Purifier HEPA filtered enclosures protect the user from agents that require biosafety level 1, 2 or 3 containment but no product protection. With ergonomic air foil with aerodynamic clean-sweep airflow openings; upper dilution air supply; zone-perforated rear baffle; side-entry air foils; and upper containment sash foil.

VE: 1 * 1 ST

Sale!

Lieferant: LABCONCO

Beschreibung: All RapidVap® Vertex™ Dry Block evaporators require a Block (not included). Blocks of solid aluminum include stainless steel handles to lift the block in and out of the evaporator. A 0,21" (0,5 cm) diameter port in the upper left hand corner of the block is provided for insertion of the temperature probe to monitor upper block temperature.

Lieferant: LABCONCO

Beschreibung: Storage cabinets support fume hoods and used for storage and venting of small laboratory instruments, mild acids and other reagents.

Lieferant: LABCONCO

Beschreibung: Hard duct exhaust connector, Ø 15,2 cm, for connecting the glove box to ductwork attached to a remote blower (Requires ductwork and remote blower)

Lieferant: LABCONCO

Beschreibung: Flexible duct connections reduce vibration between the blower and PVC ductwork.

Lieferant: LABCONCO

Beschreibung: FreeZone® bench top freeze dryers are designed for lyophilising light to moderate sample loads. The compact design is ideal for laboratories with limited floor space.

Lieferant: LABCONCO

Beschreibung: These glove boxes with stainless steel liner provide inlet and outlet ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials and perform work with contamination-sensitive materials under vacuum or in an inert environment. Available with two or four glove ports (double version).

Artikel-Nr: (LBCP3505300)

Lieferant: LABCONCO

Beschreibung: Beakers specifically designed for the Goldfisch Fat Extractor. Thick-walled borosilicate glass with flanged and ground tops to facilitate connection to the condenser.

VE: 1 * 6 ST

Sale!

Artikel-Nr: (LBCP9000732)

Lieferant: LABCONCO

Beschreibung: WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun (refer to descriptions for models that include gun) at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.

VE: 1 * 1 ST

Sale!