Sie suchten nach: Protein Extraction Kits


63  Ergebnisse wurden gefunden

SearchResultCount:"63"

Sort Results

Listenansicht Hybridansicht

Bewerten Sie das Suchergebnis

Lieferant: Thermo Fisher Scientific
Beschreibung: Detoxi-Gel™ endotoxin removing columns and gel uses polymixin B ligand immobilised on beaded affinity resin to bind and extract endotoxins from antibody or protein samples.

Artikel-Nr: (786-232)
Lieferant: G-Biosciences
Beschreibung: The FOCUS™ Protein Alkylation Kit is a proteomic grade iodoacetamide reagent kit for blocking thiols by alkylation. The kit is supplied with a proprietary buffer necessary for efficient alkylation of thiols, while minimising reoxidation of the competing thiol pairs in protein samples. Simply add an appropriate amount to reagent solutions for alkylation of protein thiol groups.
VE: 1 * 1 KIT


Artikel-Nr: (PIER89801)
Lieferant: Thermo Fisher Scientific
Beschreibung: The Mitochondria Isolation Kit for Tissue enables isolation of intact mitochondria from soft and hard tissue samples in about an hour.
VE: 1 * 1 KIT


Artikel-Nr: (324715-5)
Lieferant: Merck Millipore (Calbiochem‎)
Beschreibung: Native endoproteinase Lys-C from <i>Lysobacter enzymogenes</i>. Serine protease that specifically hydrolyses amide and peptide ester bonds at the carboxylic side of lysine in peptides and proteins. Designed for protein sequencing or sequence verification, analysis of protein structural domains, and cleavage of fusion proteins. Inhibited by aprotinin, DFP, leupeptin, and TLCK. Suggested working concentration: 1:20 to 1:100 (protease: protein by weight) for sequence analysis.
VE: 1 * 5 µG


Artikel-Nr: (786-125)
Lieferant: G-Biosciences
Beschreibung: The OrgoSol-PROTEIN-Concentration™ Kit precipitates protein with a proprietary solvent buffer, OrgoSol™. The OrgoSol™ buffer has been specifically developed for efficient precipitation of protein solutions with minimal disruption to the protein structure and therefore maintains the biological activity of most proteins.
VE: 1 * 50 mL


Artikel-Nr: (786-316)
Lieferant: G-Biosciences
Beschreibung: The HOOK™ Cell Surface Protein Isolation Kit uses HOOK™ biotin labelling and purification technology in conjunction with Mammalian Cell PE LB™ Lysis Buffer to conveniently label cell surface proteins and isolate them for further analysis, including Western blotting. The Kit is supplied with all the necessary reagents and buffers for convenience and improved reproducibility. The kit is compatible with a wide variety of mammalian cells and can be used to compare treated and untreated cells and differences between different cell lines.
VE: 1 * 1 KIT


Lieferant: Merck Millipore (Calbiochem‎)
Beschreibung: ProteoExtract® Kits cover the different steps of the proteomics workflow, from protein extraction and abundant protein removal to concentration of protein mixtures and removal of interfering substances, digestion of proteins and selective capturing of phosphopeptides. These kits work in concert with one another to provide protein samples that are directly compatible with downstream analytical applications.

Lieferant: Merck Millipore (Novagen)
Beschreibung: BugBuster® Plus Lysonase™ includes BugBuster Protein Extraction Reagent and Lysonase Bioprocessing Reagent, an optimised, ready-to-use blend of rLysozyme™ and Benzonase® Nuclease in a single kit. This powerful combination of two reagents allows maximum recovery of active soluble protein from both Gram-negative and Gram-positive bacteria. The BugBuster® and rLysozyme™ efficiently lyse the bacterial cells while the Benzonase® degrades nucleic acids to facilitate downstream processing. Requires 5 ml BugBuster and 10 µl Lysonase per 1 g cell paste. The kits provide sufficient reagents for protein extraction from 20 g or 100 g cell paste.

Artikel-Nr: (786-126)
Lieferant: G-Biosciences
Beschreibung: The Column-PROTEIN-Concentrate™ Kit has been specifically developed for concentration of those proteins that cannot be concentrated either by precipitation or other techniques. The kit is based on a proprietary Protein Binding Resin that binds and immobilises any protein in a low salt buffer between pH 2 to 12. The binding capacity is ~0,5 mg protein/ml Protein Binding Resin.
VE: 1 * 1 KIT

Artikel-Nr: (69022-3)
Lieferant: Merck Millipore (Novagen)
Beschreibung: The thrombin cleavage capture kit is designed for cleavage of fusion proteins followed by convenient and quantitative removal of thrombin protease. The method is based on the use of biotinylated thrombin for digestion and its subsequent removal with streptavidin agarose.
VE: 1 * 1 KIT


Artikel-Nr: (BRUK8217498)
Lieferant: BRUKER DALTRONIK
Beschreibung: Tryptic digest of bovine serum albumin, for 5×250 spots
VE: 1 * 1 ST

Neuer Artikel bei VWR!


Lieferant: G-Biosciences
Beschreibung: UPPA PROTEIN-Concentrate™ Kit uses a proprietary reagent UPPA™ (Universal Protein Precipitation Agent) to quantitatively concentrate dilute protein samples as low as 1 ng/ml. Concentration is not affected by the presence of common laboratory agents, including detergents and chaotropes. After precipitation, the sample is washed to remove salts and other interfering agents; complete recovery of sample is produced.

Artikel-Nr: (786-168)
Lieferant: G-Biosciences
Beschreibung: Fraction-FOCUS™ utilises proven technology to fractionate and concentrate all proteomes into multiple fractions; simplifying 2D maps and enhancing detection of low abundant proteins. Fraction-FOCUS™ is fully compatible with all downstream protein identification techniques.
VE: 1 * 10 Tests


Artikel-Nr: (PIER77662)
Lieferant: Thermo Fisher Scientific
Beschreibung: Imject™ Maleimide-Activated Blue Carrier™ Protein enables conjugation of a sulfhydryl-containing hapten to elicit an immune response and antibody production against the hapten. Blue Carrier™ Protein is a haemocyanin from the Concholepas concholepas mollusc with immunogenic properties similar to keyhole limpet haemocyanin. Blue Carrier™ Protein has a large mass (~8 × 106 Da) and has been successfully used in polyclonal and monoclonal antibody production for
synthetic haptens and peptides.
VE: 1 * 1 ST


Artikel-Nr: (80-6483-37)
Lieferant: Cytiva
Beschreibung: Sample grinding kit is ready to use for disrupting small tissue and cell samples for protein extraction.
VE: 1 * 1 KIT


Preis auf Anfrage
Lager für diesen Artikel ist begrenzt, kann aber in einem Lagerhaus in Ihrer Nähe zur Verfügung. Bitte stellen Sie sicher, dass Sie in sind angemeldet auf dieser Seite, so dass verfügbare Bestand angezeigt werden können. Wenn das call noch angezeigt wird und Sie Hilfe benötigen, rufen Sie uns an 1-800-932 - 5000.
Lager für diesen Artikel ist begrenzt, kann aber in einem Lagerhaus in Ihrer Nähe zur Verfügung. Bitte stellen Sie sicher, dass Sie in sind angemeldet auf dieser Seite, so dass verfügbare Bestand angezeigt werden können. Wenn das call noch angezeigt wird und Sie Hilfe benötigen, rufen Sie uns an 1-800-932 - 5000.
Dieses Produkt kann nur an eine Lieferadresse versandt werden die über die entsprechende Lizenzen verfügt. Für weitere Hilfe bitte kontaktieren Sie Ihr VWR Vertriebszentrum.
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
Dieses Produkt wurde von Ihrer Organisation gesperrt, lassen Sie sich gegebenenfalls ein Angebot zum Artikel erstellen.
Bitte kontaktieren Sie Ihren Einkauf für weitere Informationen.
Dieses Produkt ist Ersatz für den von Ihnen gewünschten Artikel.
Der mit diesem Symbol gekennzeichnete Artikel wird aus dem Programm genommen. Er ist nur noch bis zum Ende des Lagerbestands verfügbar. Sicher haben wir aber eine Alternative im Sortiment. Bei der Suche unterstützen wir Sie gerne! Wenden Sie sich dafür einfach an Ihre Ansprechpartner im Customer Service, Ihren Account Manager, Ihren Produktspezialisten oder unter 06151/39720 an unsere Zentrale in Darmstadt.
49 - 63 of 63
no targeter for Bottom