Sie suchten nach: MOLLER+THERM

Artikel-Nr: (628-2241)

Lieferant: MOLLER THERM

Beschreibung: Regen- und Schneemesser aus Edelstahl

VE: 1 * 1 ST

Sale!

 This is a MarketSource item. Additional charges may apply

Artikel-Nr: (763-0411)

Lieferant: MOLLER THERM

Beschreibung: Housing made of plastic. Gradation −5 to 65 °C.

VE: 1 * 1 ST

Sicherheitsdatenblätter Sale!

 This is a MarketSource item. Additional charges may apply

Artikel-Nr: (765-1092)

Lieferant: MOLLER THERM

Beschreibung: Radiometer according to Crookés. Consists of a glass container on foot with low air pressure and needle-bearing spinner with four vertical mica discs. The discs are black on one side and shiny on the other. The discs thus absorb radiation differently. The higher temperature of the dark side means that the air molecules get greater kinetic energy in collision with the dark side of the discs than with their shiny side. The result is that the spinner starts to rotate.

VE: 1 * 1 ST

Sale!

 This is a MarketSource item. Additional charges may apply

Artikel-Nr: (763-0412)

Lieferant: MOLLER THERM

Beschreibung: This baro, hygro and thermometer made from wood is designed for measurements of temperature, relative humidity and pressure.

VE: 1 * 1 ST

Sale!

 This is a MarketSource item. Additional charges may apply

Artikel-Nr: (765-1090)

Lieferant: MOLLER THERM

Beschreibung: Golden scale. Wooden plate Ø: 150 mm.

VE: 1 * 1 ST

Sale!

 This is a MarketSource item. Additional charges may apply

Lieferant: MOLLER THERM

Beschreibung: Room thermometer with five (340 mm) or seven (420 mm) balls.

Artikel-Nr: (765-1079)

Lieferant: MOLLER THERM

Beschreibung: Milk glass scale on polished wooden board. Colored liquid filling. Measuring range -10 to +100 ° C, 0 to +80 ° R, +20 to +212 ° F.

VE: 1 * 1 ST

Sale!

 This is a MarketSource item. Additional charges may apply

Lieferant: Dr. Möller & Schmelz

Beschreibung: Wasser sterile demin.

Lieferant: Merck

Beschreibung: Inlet liners used in an GC require an O-ring placed near the top for proper operation. This O-ring ensures that the only path for carrier gas to get to the outside of the inlet liner is through the grooves in the inlet seal at the bottom of the injection port.

Artikel-Nr: (ELTN600040)

Lieferant: ELTEN

Beschreibung: Das Therm-IC-System trocknet feuchte Schuhe und Handschuhe innerhalb weniger Stunden.

VE: 1 * 1 ST

Sale!

Artikel-Nr: (HYPETS-18820)

Lieferant: Thermo Fisher Scientific

Beschreibung: Blockthermostate, Digital, Reacti-Therm™

VE: 1 * 1 ST

Sale!

Lieferant: Thermo Fisher Scientific

Beschreibung: Blockthermostat, Digital, Reacti-Therm™, Anzahl Blöcke: 1, Temperaturbereich: Raumtemperatur +10...200 °C

Lieferant: LAUDA

Beschreibung: These transfer fluids allow highly accurate thermostating, even at extreme temperatures.

Sicherheitsdatenblätter

Artikel-Nr: (453-2127)

Lieferant: GESTIGKEIT HARRY

Beschreibung: Ceran® THERM CT 10 is an glass ceramic instrument. It is extremely resistant to breakage, temperature changes, will not distort and permeable to UV light and also highly acid resistant. The temperature is controlled by an output controller without any performance loss. Heating time for 500 °C is approximately 3 min. The low mass CERAN® plate with a central diameter of 150 mm is electrically heated and is mounted on a stainless steel housing.

VE: 1 * 1 ST

Sale!

Lieferant: Thermo Fisher Scientific

Beschreibung: Triangular stir bars can be used for faster reaction times and smooth mixing of small samples in conical-bottom vials of the Thermo Scientific™ Reacti-Therm™ Derivatization System. The stir bars provide simultaneous stirring of samples in multiple vials when used with a Reacti-Therm Heating/Stirring Module equipped with appropriate Reacti-Block Aluminium Blocks.

Artikel-Nr: (AMARM235030)

Lieferant: Amarell

Beschreibung: Glass thermometer accessory, metal case, Metal case with metal ferrules, DIN 51801, mounted on dropping point therm

VE: 1 * 1 ST

Sale!