Sie suchten nach: Zentrifugenröhrchen


192  Ergebnisse wurden gefunden

Sort Results

Listenansicht Hybridansicht
SearchResultCount:"192"
Beschreibung: ULTRAgrade® 15 and 19 oils result from a new process. Most manufacturers use a solvent refining process, whereas these oils are produced by a unique hydrotreating process. This process eliminates nitrogen, sulphur and oxygen and the aromatic hydrocarbons, leaving a clear base stock essentially free of impurities.
Artikel-Nr: 181-0379
VE: 1 * 4 L
Lieferant: EDWARDS HIGH VACUUM METTLER


Beschreibung: Mist filters are used to separate and trap oil mist and dischage the odours with the exhaust from oil sealed rotary vacuum pumps.
Artikel-Nr: 531-0016
VE: 1 * 1 ST
Lieferant: EDWARDS HIGH VACUUM METTLER


Beschreibung: The active gauge displays are a range of simple, low cost units for the measurement and control of vacuum from atmosphere to 10<sup>-9</sup> mbar.
Artikel-Nr: EDWAD39585000
VE: 1 * 1 ST
Lieferant: EDWARDS HIGH VACUUM METTLER


Beschreibung: E2M1,5 two stage oil sealed rotary vane pumps are renowned for achieving high ultimate vacuum and rapid pumping speeds, with quiet operation and compact size.
Artikel-Nr: EDWAA37132919
VE: 1 * 1 ST
Lieferant: EDWARDS HIGH VACUUM METTLER


Beschreibung: Schlauch, PVC, PVC, Gewebeeinlage, Schlauch Innen-Ø: 25,4 mm, Länge: 1 m
Artikel-Nr: EDWAH02100017
VE: 1 * 1 ST
Lieferant: EDWARDS HIGH VACUUM METTLER


Beschreibung: Active Inverted Magnetron gauge is a combined unit of the gauge-head and controller. This gauge operates as a cold cathode ionisation gauge, in which pressure is measured indirectly as a function of the current that flows in a Townsend discharge maintained in the body tube.
Artikel-Nr: 619-0222
VE: 1 * 1 ST
Lieferant: EDWARDS HIGH VACUUM METTLER


Beschreibung: Modell APG. Diese Messgeräte haben einen atmosphärischen Luftdruckmessbereich bis 1×10⁻⁴ mbar und vereinen Messkopf und Steuerung in einer kompakten aktiven Einheit.
Artikel-Nr: 619-0221
VE: 1 * 1 ST
Lieferant: EDWARDS HIGH VACUUM METTLER


Beschreibung: Elbows 90°, DN 40 mm, Edelstahl
Artikel-Nr: EDWAC10512420
VE: 1 * 1 ST
Lieferant: EDWARDS HIGH VACUUM METTLER


Beschreibung: T-pieces made of aluminium or stainless steel.
Artikel-Nr: EDWAC10516421
VE: 1 * 1 ST
Lieferant: EDWARDS HIGH VACUUM METTLER


Beschreibung: ATEX RV pumps have an external ATEX classification of Ex II 2G IIC T4 or Ex II 2G IIB T4 and internal ATEX classification Ex II 3G c IIB T4. They are suitable for use in potentially explosive atmospheres such as hazardous area pumping. They are supplied with the gas ballast port which must be fitted with an inert gas purge while pumping flammable gasses or vapours to dilute such gases or vapours below the lower explosive limit.
Artikel-Nr: EDWAA65518989
VE: 1 * 1 ST
Lieferant: EDWARDS HIGH VACUUM METTLER


Beschreibung: A range of Apiezon® greases is offered for use on high vacuum systems and for many general applications in the laboratory. These high purity greases are non-toxic, are easy to apply and clean off and have long shelf lives.
Artikel-Nr: EDWAH11150001
VE: 1 * 25 g
Lieferant: EDWARDS HIGH VACUUM METTLER


Beschreibung: The XDS pumps are used as a patented bearing shield to isolate the vacuum environment from all forms of lubricant, not only making it totally dry, but hermetically sealed. The shield also protects the bearing from any process vapours. Adjustable gas ballast allows vapour to be handled and opens up the range of applications to many that were previously unsuited to scroll pumps. The XDS-C range are designed for pumping condensable vapors and use materials selected for a wide range of laboratory wet chemistry applications.
Artikel-Nr: 181-0365
VE: 1 * 1 ST
Lieferant: EDWARDS HIGH VACUUM METTLER


Beschreibung: Blade kit pump
Artikel-Nr: EDWAA65301130
VE: 1 * 1 ST
Lieferant: EDWARDS HIGH VACUUM METTLER


Beschreibung: Inlet Desiccant Trap IDT20K: Use when pumping limited quantities of water vapour at high pumpings speeds to a low vapour pressure.
Artikel-Nr: 181-0095
VE: 1 * 1 ST
Lieferant: EDWARDS HIGH VACUUM METTLER


Beschreibung: Ersatzteilsätze umfassen Dichtungssätze, Überholungssätze, vorbeugende Wartungssätze und mehr. Nur Originalersatzteile garantieren eine bequeme Wartung, perfekte Passform und zuverlässige Leistung Ihrer Geräte nach der Wartung.
Artikel-Nr: EDWAA50597801
VE: 1 * 1 ST
Lieferant: EDWARDS HIGH VACUUM METTLER

Neuer Artikel bei VWR!


Beschreibung: Reducing cross, stainless steel, 130 mm, DN 40/25, Edelstahl
Artikel-Nr: EDWAC10514424
VE: 1 * 1 ST
Lieferant: EDWARDS HIGH VACUUM METTLER