Sort Results

Listenansicht Hybridansicht
SearchResultCount:"184"
Beschreibung: The SensoLyt® measuring chains with arming are easy to install and boast flexible measuring and application areas. Eletrodes without arming can be connected directly to a pH monitor of the EcoLine® or QuadroLine® series. Depending on the application, they can be installed into a flow vessel.
Artikel-Nr: WTWO109118
VE: 1 * 1 ST
Lieferant: WTW ONLINE


Beschreibung: The special design of the process line electrodes makes them close to optimal in their accuracy, stability, speed and longevity to liquid electrolyte electrodes. For the use in pipelines, they can be installed into the replacement fitting CHEMtrac 830 M.
Artikel-Nr: WTWO109233
VE: 1 * 1 ST
Lieferant: WTW ONLINE


Beschreibung: Potentiostatic D.O. sensors with integrated temperature sensor.
Artikel-Nr: 662-0286
VE: 1 * 1 ST
Lieferant: WTW ONLINE


Beschreibung: EDTA Dinatriumsalz Dihydrat
Artikel-Nr: WTWO821071
VE: 1 * 1 ST
Lieferant: WTW ONLINE


Beschreibung: pH/ORP sensor SensoLyt® 700-7, with integrated preamplifier and NTC; cable length 7 m, Für: EcoLine and QuadroLine® monitors, Für: EcoLine and QuadroLine® monitors
Artikel-Nr: 662-0281
VE: 1 * 1 ST
Lieferant: WTW ONLINE


Beschreibung: To optimally satisfy the various requirements for a wide range of wastewater and water applications, the TriOxmatic® series offers the choice of several D.O sensors with different operating specifications. All models are based on the potentiostatic 3-electrode principle and have the same reliability and precision; however, their resolutions, response times and required flow rates are adapted to suit different applications.
Artikel-Nr: WTWO201692
VE: 1 * 1 ST
Lieferant: WTW ONLINE


Beschreibung: This system – consisting of a robust, digital armature with ammonium replacement electrode and ammonium reference electrode – allows ammonium measurement directly in the medium, without sample preparation. The system is designed for connection to the IQ SENSOR NET multiparameter measuring system.
Artikel-Nr: WTWO107042
VE: 1 * 1 ST
Lieferant: WTW ONLINE


Beschreibung: Elektrode, Sauerstoff
Artikel-Nr: WTWO202621
VE: 1 * 1 ST
Lieferant: WTW ONLINE


Beschreibung: Peristaltikpumpe, Pump hoses for permeate pump, Model SET1/PurCon
Artikel-Nr: WTWO820066
VE: 1 * 1 SET
Lieferant: WTW ONLINE


Beschreibung: Elektrode, Sauerstoff, Ecoline, TriOxmatic® 690-7, 0 - 60 mg/l; 0 - 600%, 196 mm, 7 m cable, with watertight plug (IP65)
Artikel-Nr: 662-0287
VE: 1 * 1 ST
Lieferant: WTW ONLINE


Beschreibung: With the NitraLyt® Plus 700 IQ, nitrate can be determined directly in the medium. This makes measured values available in a timely manner and they can easily be used for regulation purposes.
Artikel-Nr: WTWO107080
VE: 1 * 1 ST
Lieferant: WTW ONLINE


Beschreibung: Potassium compensation electrode with ammonium measuring, VARiON® Plus K, measuring range 1 - 1000 mg/l K⁺, Für: VARiON® Plus<sup> </sup>700 IQ and for AmmoLyt® Plus
Artikel-Nr: WTWO107047
VE: 1 * 1 ST
Lieferant: WTW ONLINE


Beschreibung: Temperaturfühler
Artikel-Nr: WTWO102282
VE: 1 * 1 ST
Lieferant: WTW ONLINE


Beschreibung: SACIQ-25.0 SW, IQ sensor connection cable, 25 m (seawater version), Elektrode, Sauerstoff
Artikel-Nr: 706-0527
VE: 1 * 1 ST
Lieferant: WTW ONLINE


Beschreibung: Ein optisches Fluoreszenz-Verfahren, das höhere Genauigkeit und bessere Auflösungsmessung bietet als elektrochemische Verfahren. Intelligente Membran mit IQMC-Technologie bedeutet, dass jede Membran einzeln kalibriert wird und die Daten auf einem dauerhaft an der Membran befestigten Speicherchip hinterlegt werden.
Artikel-Nr: 706-0525
VE: 1 * 1 ST
Lieferant: WTW ONLINE


Beschreibung: In-situ combination sensor for direct measurements of ammonium and nitrate using only one sensor. Designed for the installation of a measuring electrode, a reference electrode and a compensation electrode.
Artikel-Nr: WTWO107040
VE: 1 * 1 ST
Lieferant: WTW ONLINE


1 - 16 of 184