Sie suchten nach: Mineralölindustrie-Standards

Developed to facilitate successful international trades, petroleum industry standards evaluate the properties of naturally occurring energy resources. Whether testing in refineries, processing plants, or production sites, the solutions ensure compliance requirements are always met. The liquids serve as the technical basis for safety level regulations and mitigating equipment failure risks. By enhancing operational excellence in machinery, the high quality petroleum industry standards inherently reduce any environmental impact and consumer costs.

Developed to facilitate successful international trades, petroleum industry standards evaluate the properties of naturally occurring energy resources. Whether testing in refineries, processing plants, or production sites, the solutions ensure compliance requirements are always met. The liquids serve as the technical basis for safety level regulations and mitigating equipment failure risks. By enhancing operational excellence in machinery, the high quality petroleum industry standards inherently reduce any environmental impact and consumer costs.


224  Ergebnisse wurden gefunden

SearchResultCount:"224"

Sort Results

Listenansicht Hybridansicht

Bewerten Sie das Suchergebnis

Artikel-Nr: (REST31222)
Lieferant: Restek
Beschreibung: D2887 calibration mix contains compound, conc.; (C6) n-hexane (110-54-3), 6% w/w; (C7) n-heptane (142-82-5), 6% w/w; (C8) n-octane (111-65-9), 8% w/w; (C9) n-nonane (111-84-2), 8% w/w; (C10) n-decane (124-18-5), 12% w/w; (C11) n-undecane (1120-21-4), 12% w/w; (C12) n-dodecane (112-40-3), 12% w/w; (C14) n-tetradecane (629-59-4), 12% w/w; (C16) n-hexadecane (544-76-3), 10% w/w; (C18) n-octadecane (593-45-3), 5% w/w; (C20) n-eicosane (112-95-8), 2% w/w; (c24) n-tetracosane (646-31-1), 2% w/w; (c28) n-octacosane (630-02-4), 1% w/w; (C32) n-dotriacontane (544-85-4), 1% w/w; (C36) n-hexatriacontane (630-06-8), 1% w/w; (C40) n-tetracontane (4181-95-7), 1% w/w; (C44) n-tetratetracontane (7098-22-8), 1% w/w.
VE: 1 * 1 ST

Zertifikate


Lieferant: Restek
Beschreibung: These solutions are prepared from a single-source (one-refinery) product.

Artikel-Nr: (REST30485)
Lieferant: Restek
Beschreibung: Confirms unleaded gasoline TPH, BTEX and aromatics in single analysis.
VE: 1 * 1 ST


Lieferant: LGC Standards PROMOCHEM
Beschreibung: This matrix material solution is intended for use as a diluent for other metallo-organic standards.
Lieferant: Restek
Beschreibung: Diesel fuel composite standards are comprised of three separate sources blended in equal portions. It may exhibit lot-to-lot variation.

Artikel-Nr: (PROONIST-2719)
Lieferant: LGC Standards PROMOCHEM
Beschreibung: This reference standard is intended primarily for use in the calibration of apparatus and the evaluation of techniques employed in the analysis of calcined petroleum coke and other materials with a similar matrix.
VE: 1 * 50 g


Lieferant: Restek
Beschreibung: Unleaded gasoline composite standards are comprised of three separate sources each of 87, 89, and 93 octanes blended in equal portions.

Artikel-Nr: (REST30486)
Lieferant: Restek
Beschreibung: Certified reference materials (CRMs) manufactured and QC-tested in ISO-accredited labs satisfy your ISO requirements.
VE: 1 * 1 mL


Artikel-Nr: (751-0029)
Lieferant: STANHOPE SETA
Beschreibung: Flash Check, secondary verification material
VE: 1 * 3 ST


Artikel-Nr: (REST31488)
Lieferant: Restek
Beschreibung: The mix consists of, (C8) n-octane, (C10) n-decane, (C12) n-dodecane, (C16) n-hexadecane, (C21) n-heneicosane, (C34) n-tetratriacontane.
VE: 1 * 1 ST


Artikel-Nr: (REST31457)
Lieferant: Restek
Beschreibung: Contains two components, those are n-hexadecane and stearic acid.
VE: 1 * 5 mL


Artikel-Nr: (REST30647)
Lieferant: Restek
Beschreibung: The mix consists of benzene (5% vol/vol), toluene (20% vol/vol).
VE: 1 * 1 Ampull


Artikel-Nr: (PROOCON150-400-010)
Lieferant: LGC Standards PROMOCHEM
Beschreibung: Sulphur in mineral oil, CONOSTAN, 25 µg/g
VE: 1 * 100 g


Artikel-Nr: (PROOVHGGASFDBLK100)
Lieferant: LGC Standards PROMOCHEM
Beschreibung: This standard is intended for use in the determination of gasoline in used gasoline engine oil by gas chromatography (GC), IR, fuel dilution meter (fuel sniffer) and flash point analyser.
VE: 1 * 100 mL


Lieferant: Restek
Beschreibung: ASTM D3606 calibration standard #2 with MEK internal standard, isooctane includes benzene, 2,4%, 2-butanone, 4%, toluene 14,4%, Pk Info: 1 ml/ampoule

Lieferant: Restek
Beschreibung: DRO mix (EPA/wisconsin) with 10 components, includes n-decane (C10), n-eicosane (C20), n-dodecane (C12), n-docosane (C22), n-tetradecane (C14), n-tetracosane (C24), n-hexadecane (C16), n-hexacosane (C26), n-octadecane (C18), n-octacosane (C28), with 2000 μg/ml each in methylene chloride in 1 ml/ampule

Preis auf Anfrage
Lager für diesen Artikel ist begrenzt, kann aber in einem Lagerhaus in Ihrer Nähe zur Verfügung. Bitte stellen Sie sicher, dass Sie in sind angemeldet auf dieser Seite, so dass verfügbare Bestand angezeigt werden können. Wenn das call noch angezeigt wird und Sie Hilfe benötigen, rufen Sie uns an 1-800-932 - 5000.
Lager für diesen Artikel ist begrenzt, kann aber in einem Lagerhaus in Ihrer Nähe zur Verfügung. Bitte stellen Sie sicher, dass Sie in sind angemeldet auf dieser Seite, so dass verfügbare Bestand angezeigt werden können. Wenn das call noch angezeigt wird und Sie Hilfe benötigen, rufen Sie uns an 1-800-932 - 5000.
Dieses Produkt kann nur an eine Lieferadresse versandt werden die über die entsprechende Lizenzen verfügt. Für weitere Hilfe bitte kontaktieren Sie Ihr VWR Vertriebszentrum.
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
Dieses Produkt wurde von Ihrer Organisation gesperrt, lassen Sie sich gegebenenfalls ein Angebot zum Artikel erstellen.
Bitte kontaktieren Sie Ihren Einkauf für weitere Informationen.
Dieses Produkt ist Ersatz für den von Ihnen gewünschten Artikel.
Der mit diesem Symbol gekennzeichnete Artikel wird aus dem Programm genommen. Er ist nur noch bis zum Ende des Lagerbestands verfügbar. Sicher haben wir aber eine Alternative im Sortiment. Bei der Suche unterstützen wir Sie gerne! Wenden Sie sich dafür einfach an Ihre Ansprechpartner im Customer Service, Ihren Account Manager, Ihren Produktspezialisten oder unter 06151/39720 an unsere Zentrale in Darmstadt.
113 - 128 of 224
no targeter for Bottom